Iq option 5 min strategy
SMS Alert Settings. Phone number of recipient to whom you want to send the SMS alert. Text in the SMS that is sent to the recipient. NOTE Ensure that you configure the Mail Sender and SMS Sender policies with the sender details that are required to send an alert. Example 1 Enrolling Multiple Fingers and Authenticating with One of the Enrolled Fingers. Consider Thomas, an administrator has performed the following steps to enforce users to enroll the Fingerprint method using the Greenbit DactyScan84c device.
Users can authenticate to Linux workstation with the Fingerprint method. Set Force to use multi-finger reader to ON in the Fingerprint method. Created a chain with the Fingerprint method and added another preferred method such as LDAP password or Password. Mapped the chain to the Linux Logon event. Paul, an end user, logs in to the Self Service portal and clicks on the Fingerprint icon.
He selects the four fingers of Right hand and enrolls using the Green Bit DactyScan device. After enrollment, Paul authenticates to his Linux workstation with the Nitgen device using one of the enrolled fingers. He gets authenticated successfully. Example 2 Authenticating with a Duress Finger During an Emergency Situation. Consider Thomas, an administrator has performed the following steps to assign an enrolled finger as duress.
Set Enable Duress finger configuration to ON in the Fingerprint method. Configured Alert Configuration with the alert notification text, mail address and phone number of a network security officer to send email and SMS. Created a chain with the Fingerprint method along with preferred methods such as LDAP password and Password. Assigned the chain to Networks group. Mail server is hosted on the Linux workstation. Paul, a network staff, logs in to the Self Service portal and clicks on the Fingerprint icon.
He enrolls the middle, index, ring and little fingers of the left hand. Later, he selects Left index from Assign Duress Finger drop down. Assume, on an unfortunate day, a miscreant forcibly enters the organization and threatens Paul to authenticate to the Linux workstation. In this situation, Paul can use the duress finger Left index finger for authentication which triggers an alert notification to configured security personnel, who will take the necessary action.
9 LDAP Password. In the LDAP Password method, the Advanced Authentication client retrieves password that is stored in the user repository from the Advanced Authentication server. To configure LDAP Password method, perform the following steps. Set Save LDAP password to ONthe prompt for LDAP password synchronization is displayed only for the first time until the password is changed or reset.
NOTE You can bypass the password synchronization dialog after the password change or reset by configuring the Password Filter. For configuring the Password Filter, see Password Filter for Active Directory. If you set this option to OFF. If the LDAP Password method is included in a chain, users will be prompted for synchronization each time. If the LDAP Password method is not included in a chain, users will not be prompted for synchronization.
Set Enable SSPR integration to ON if you want to enable the Self Service Password Reset integration for Advanced Authentication web portals. Specify the SSPR link text. This link is displayed on the login page where user specifies the LDAP Password. Specify the SSPR URL. This URL points to the Self Service Password Reset portal. Set Enable cached logon to ON to validate user specified password with password stored cached in the Advanced Authentication server during authentication.
When the Enable cached logon option is set to OFF default behaviorthe Advanced Authentication server always contacts the LDAP server to validate the user password. It may cause performance issues. If the user password does not match with the stored password or password iq option 5 min strategy not stored on the Advanced Authentication server, then cached value gets reset and Advanced Authentication server contacts the LDAP server to validate the user password.
If the user specified password matches the cached password, the Advanced Authentication server validates user password with LDAP server in the background. If the validation failed, the password stored on Advanced Authentication Server gets reset, so next login will be without cache. NOTE The Enable cached logon option works only if any one of the following setting is set to ON. Save LDAP password in the LDAP Password method. Enable local caching in the Cache Options policy.
LDAP password is stored on the Advanced Authentication server at the following two places. User data It is used for OS logon Windows Client, Mac OS X Client, and Linux PAM Client and is stored when Save LDAP password option in LDAP Password method is set to ON. LDAP password authenticator It is used while using cached logon. The password is stored when the Enable local caching option is set to ON in the Cache Options Policy.
OATH Initiative for Open Authentication is an industry-wide collaboration to develop an open reference architecture using open standards to promote the adoption of strong authentication using OTP. Advanced Authentication supports the following two different types of OATH OTP. You can configure the following settings for the OATH methods. HOTP is a counter based one time password.
To configure the HOTP authenticator, you can specify the following parameters. OTP format The number of digits in the OTP token. The value must be the same as of the tokens you are using. OTP window The size of OTP window defines number of valid OTP for authentication. When the counters are out of sync, this parameter determines the difference between the counter on the token and the server.
Based on the difference, the server can recalculate the next OTP value to validate with the OTP received from the token. The server stores the last counter value C for which the user has provided a valid password. While verifying a new OTP from the token, the server validates C 1, C 2. until one of the OTP is identical, or till C w, where w represents the OTP window. You can use the HOTP token such as Yubikey token to access not only Advanced Authentication, but also some websites or third-party services.
After each use or when users press the token button accidentally, the HOTP counter on the token is increased by 1. Therefore, the counter will be out of sync between the token and Advanced Authentication server. For example, if the OTP window is set to 10 by defaultand the current counter value of the server is 100, then any OTP generated from the token with a counter value from 100 to 110 are valid for authentication.
WARNING Do not increase the HOTP window value to more than 100 as it may decrease the security by causing false matches. During enrollment or HOTP counter synchronization in the Self-Service portal, Enrollment HOTP window that has a value of 100,000 is used. This is helps in the following. HOTP tokens may be used for a long period before the enrollment in Advanced Authentication and the value is unknown and can be equal to some thousands.
Secure because users must provide 3 consequent HOTPs. Configuring Yubikey for Advanced Authentication Server. Download and install the Yubikey Personalization Tool from Yubico. To download the Yubikey Personalization Tool, see the Yubico website. Insert the Yubikey token. Ensure that the token is recognized. The recognition is indicated by a message Yubikey is inserted at the top-right corner of the Personalization tool. Select OATH-HOTP mode. Select Configuration Slot 1generate the OATH Token Identifier and Secret Key.
In Logging Settingsselect Log configuration output. Select Traditional format or Yubico format. Click Write Configuration and save the CSV file. For information about how to enroll the HOTP method, see HOTP in the Advanced Authentication- User guide. TOTP is a time based one time password. To configure the TOTP authenticator, you can specify the following parameters. OTP period sec The value to specify how often a new OTP is generated.
The maximum value for the OTP period is 360 seconds. The value must be the same as the tokens you are using. OTP window The value to specify the periods used by Advanced Authentication server for TOTP generation. For example, if you have a period of 30 and a window of 4, then the token is valid for 2 30 seconds before current time and 2 30 seconds after current time, which is 2 minutes. These configurations are used because time can be out-of-sync between the token and the server and may impact the authentication.
The maximum value for the OTP window is 64 periods. IMPORTANT It is not recommended to use an OTP window equal to 32 and higher for 4-digit OTP because it reduces security. Google Authenticator format of QR code Key URI Option to display the QR code for the TOTP enrollment of the software token in a format that is compatible with the Google Authenticator, Microsoft Authenticator, or the NetIQ Auth apps.
When you disable the option, the displayed QR code can be scanned only with the NetIQ Auth smartphone app. Enable the option to allow enrollment with the Google Authenticator or Microsoft Authenticator apps. The QR code of Google Authenticator format can also be scanned with the NetIQ Auth app supported by the last iOS and Android apps.
IMPORTANT OTP format must be set to 6 digits when you use the Google Authenticator format of QR code. Allow manual enrollment When you enable the option, the Specify the TOTP secret manually section is displayed on the TOTP enrollment page of the Self-Service portal with the following parameters SecretPeriodand Google Authenticator format of secret Base32. By default, the option is disabled and the settings are hidden. Enabling the option may result in security risks.
You must perform the following tasks to allow the users to enroll TOTP method using the Desktop OTP tool. Generating an Enrollment Link. Users can click the enrollment link to enroll the TOTP authenticator automatically on the Desktop OTP tool and following the iq option 5 min strategy steps as described in Desktop OTP Tool. To generate an enrollment link, you can encode the server URL, tenant ID, and category name to the Base64 format using any online tool. The generated link is then sent to the users through the email to access the Desktop OTP tool and enroll the TOTP authenticator.
The users can create an account on the tool to enroll the TOTP authenticator in the Self-Service portal. To generate the enrollment link in the Base64 format, perform the following steps. To encode use the details such as server URL, tenant ID and category name in the following format. You can specify the preferred category name for category_name parameter if you have added categories in the Event Categories policy. You can remove the parameter category_nameif you have not added any category.
You can specify TOP for the tenant_name parameter, if the Multitenancy mode is disabled. Encode the value including to Base64 charset UTF-8 format. For example, the encoded link is displayed as. Copy the encoded link for further use. Sending an Enrollment Link Through Email. Compose an email with the subject and body. For example, specify TOTP Enrollment Link in the Subject and body as follows.
Hi Users, Click here to enroll for the TOTP authenticator using the Desktop OTP tool. Right click on the preferred text and select Hyperlink. Specify the encoded link and prefix aaf-otp in Address. For example, aaf-otp eyJzZXJ2ZXJfdXJsIjogImFhZnNlcnZlci5jb21wYW55LmNvbSIsICJ0ZW5hbnRfbmFtZSI6Im5ldGlx4oCdLCAiY2F0ZWdvcnlfbmFtZSI6ICJIT01FIn0. Specify the email address of the preferred users in To then click Send. User can click the hyperlink to open the Desktop OTP automatically.
Importing PSKC or CSV Files. You can import the PSKC or CSV files. These token files contain token information. To import these files, perform the following steps. Click the OATH Token tab. Click Browse and select a PSKC or CSV file. Choose a File type. OATH compliant PSKC This file type must be compliant with OAuth. For example, HID OATH TOTP compliant tokens.
OATH csv This file type must contain the format as described in CSV File Format To Import OATH Compliant Tokens. You cannot use the YubiKey CSV files. Yubico csv In this file type, you must use one of the supported Log configuration output see YubiKey Personalization Tool Settings tab Logging Settings formats with comma as a delimiter.
Traditional format In this file type, OATH Token Identifier must be enabled. Yubico format This file type is supported only for HOTP Length set to 6 Digits and OATH Token Identifier set to All numeric. IMPORTANT Moving Factor Seed must not exceed 100000. Add the encrypted PSKC files. For this, select Password or Pre-shared key in PSKC file encryption type and provide the information.
You can select Not encryptedif the PSKC file is not encrypted with either the password or key. Click Upload to import tokens from the file. NOTE Advanced Authentication receives an OTP format from the imported tokens file and stores the information in the enrolled authenticator. Therefore, you need not change the default value of OTP format on the Edit Method tab.
When the tokens are imported, you can see the list and you must assign the tokens to users. This can be done in the following two ways. Click Edit next to the token and select Owner and click Save. A user can self-enroll a token in the Self-Service portal. Administrator must let the user know an appropriate value from the Serial column for the self-enrollment. NOTE Tenancy settings are not supported for the OATH tokens.
Therefore, the configurations in the OATH Tokens tab cannot be enforced on tenant administrators. CSV File Format To Import OATH Compliant Tokens. A CSV file, which is imported as OATH csv file in the Administration portal Methods OATH OTP OATH Tokens tab, must contain fields with the following parameters. Token s serial number. Optional Type of the token TOTP or HOTP by default HOTP. Optional OTP length default value is 6 digits. Optional Time step default value is 30 seconds.
Comma is a delimiter. The following is an example of a CSV file. IMPORTANT For the YubiKey tokens, you must use the traditional format of the CSV check YubiKey Personalization Tool Settings tab Logging Settings with comma as a delimiter. Use Yubico csv file type Advanced Authentication Administration portal Methods OATH OTP OATH Tokens. 11 Password. In the Password authentication method, you can configure security options for passwords that are stored in the appliance.
For example, the l ocal admin user who does not have an LDAP Password can use this option. NOTE Do not use the Password method in chains that contain only one factor. You must always combine the Password method with other factors. You can configure the following options for the Password method. Minimum password length The maximum length of the password. Maximum password age The validity period of the password. The default value is 42 days.
If you set the value to 0, the password never expires. Complexity requirements Option to enable users to create a complex and not easily detectable password. Set to ON to enable this option. IMPORTANT Advanced Authentication does not generate notifications about the password expiry. After the password expires, the local administrator cannot sign-in to the Administration portal and users using this method cannot get authenticated. However, an administrator and a user can change their passwords in the Self-Service portal.
The Public Key Infrastructure PKI creates, stores, and distributes digital certificates. These certificates are used to verify whether a particular public key belongs to a specific entity. Advanced Authentication supports the following two forms of PKI authentication. PKI device stores the digital certificates and private keys securely. It uses the PKI infrastructure to store personal details of user such as private key, PIN, and digital certificate.
You can configure the following settings for the PKI method. Adding the Trusted Root Certificates. You must upload the trusted root certificates for the PKI method. These certificates must meet the following requirements. Root CA certificate is in the. The certificate for PKI device contains a key pair public and private key in the x509 format. The certificates that do not comply with the requirements are ignored and hidden during enrollment.
To upload a new trusted root certificate, perform the following steps. Click Add in the Edit Method page of PKI. pem certificate file and click Upload. NOTE You must upload only the Root CA on appliance. You can configure the PKI method with certificates in one of the following ways. NOTE Advanced Authentication supports the p7b format of parent certificates. These p7b format files can contain certificates and chain certificates, but not the private key.
They are Base64 encoded ASCII files with extensions. Configuring the Environment for a Standalone Root CA. Install Web Server IIS Role. Create the CertEnroll Folder and grant Share NTFS permissions to the Cert Publishers group. Create CertEnroll Virtual Directory in IIS. Enable Double Escaping on IIS Server. Install Enterprise Root CA using Server Manager. Enable Object Access Auditing on CA. Configure the AIA and CDP. Publish the Root CA Certificate to AIA. Export Root CA in.
der format and convert the format to. Export personal certificate that was signed by Root CA with private key and place it on a PKI device. Configuring the Environment for a Subordinate CA. Create the CertEnroll Folde r and grant Share NTFS permissions to Cert Publishers group. Install the Standalone Offline Root CA. Iq option 5 min strategy a CAPolicy. inf for the standalone offline root CA. Installing the Standalone Offline Root CA. Enable Auditing on the Root CA. Install Enterprise Issuing CA.
Create CAPolicy. inf for Enterprise Root CA. Publish the Root CA Certificate and CRL. Install Subordinate Issuing CA. Submit the Request and Issue subordinate Issuing CA Certificate. Install the subordinate Issuing CA Certificate. Configure Certificate Revocation and CA Certificate Validity Periods. Enable Auditing on the Issuing CA.
Install and configure the Online Responder Role Service. Add the OCSP URL to the subordinate Issuing CA. Configure and publish the OCSP Response Signing Certificate on the subordinate Issuing CA. Configure Revocation Configuration on the Online Responder. Configure Group Policy to provide the OCSP URL for the subordinate Issuing CA. Export personal certificate that was signed by subordinate CA with private key and place it on a PKI device. Disabling the Key-Pair Option.
The Allow key-pair option is enabled by default. This indicates that the enrollment of the PKI method can be done with either the CA certificates or through the key-pair generation. However, you can disable the key-pair based enrollment of the PKI device and enforce PKI enrollment only using a user certificate issued by the CA. To disable this option, set Allow key-pair to OFF. Virtual Smartcard. Virtual Smartcard is an extension of PKI method. The information available in the virtual smartcard is used to authenticate the user to any web environment.
NOTE The virtual smartcard supports authentication to the OAuth 2. The virtual smartcard does not support authentication to Advanced Authentication portals, such as Administration, Helpdesk, Self-Service, and Reporting. To configure the virtual smartcard, perform the following steps. NOTE Before you configure the virtual smartcard support for the SAML 2. domain_name in the Web Authentication policy.
Later, save the settings before downloading the SAML 2. 0 metadata file. NOTE Before you configure virtual smartcard support for the PKI method, ensure to perform the following tasks. Resolve the IP address of Advanced Authentication server with the following host names on the DNS server. Define the following attributes in the third-party application that you want to integrate with Advanced Authentication server.
Set Enable Client SSL for Webauth Service to ON and upload Root CA certificate in the. pem format that is used by the Web server. Set Enable auto enrollment based on certificate to ON. This enables you to allow users to auto-enroll the PKI method using virtual smartcard for the OAuth 2. NOTE The manual enrollment of the PKI method using the virtual smartcard is not supported. With this configuration, the users can auto-enroll PKI method using virtual smartcard when they access OAuth 2. 0 event for the first time and select a valid certificate.
This auto-enrollment happens irrespective of enrollment status of other method s that are available with the PKI method in the same authentication chain. To allow a user to login to the OAuth 2. 0 events before auto-enrolling the PKI method, ensure to add at least one more chain to the event for example, a chain with only the LDAP Password method below the PKI chain. The user must enroll all method s of new chain.
During the first login attempt, the PKI method using the virtual smartcard gets enrolled automatically. For the sub-sequent log ins, the top chain in the list which is PKI is selected and user is authenticated automatically. Upload Root CA certificate in the Trusted root certificates section of PKI method. Import the client SSL certificate to the users browser.
NOTE The procedure to import the client SSL certificate varies on each browser. For more information about how to import the client SSL certificate to the Chrome browser, see Importing Client SSL Certificate to a Certificate Store. An Example of Auto-enrolling PKI Method with the Virtual Smartcard. Consider the administrator has performed the following steps to allow auto-enrollment of the PKI method using the virtual smartcard.
Created a chain with the PKI method and another chain with preferred methods such as LDAP password and Password. Mapped the chain to the OAuth 2 event. Set Enable SSL Client Certificate to ON and uploaded a valid CA certificate. Imported the client certificate to the user s browser in the. pfx format containing details, such as digital signature, expiration date, name of user, name of CA and so on.
Mark, an end user, wants to auto-enroll the PKI method using the virtual smartcard. When he tries to access the somecompany. com website, the user name stored in the certificate gets filled in the user name field in the login form automatically. Mark is required to select the preferred certificate to validate his identity in the User Identification Request dialog box.
Then, Mark must specify LDAP details for additional validation. If the specified details are valid, Mark gets auto-enrolled to the PKI method using the virtual smartcard without physical PKI token. During subsequent logins, Mark may experience one of the following scenario. If there is a chain with only PKI method associated to the web authentication event, then Mark gets authenticated automatically. If there are more than one chain associated to the web authentication event, then Mark is prompted with the list of chains that contains PKI in addition to other available chains.
In this case, he can select the chain with only PKI method to authenticate automatically or select preferred chain and provide corresponding details to authenticate successfully. Importing Client SSL Certificate to a Certificate Store. To enable and achieve the virtual smartcard authentication to the web environment, it is required to import the Client SSL certificate to the browser. To import the client SSL certificate to Google Chrome browser, perform the following steps.
Navigate to Settings Manage Settings. The Certificates wizard is displayed. Click Import and select the client SSL certificate. Ensure that the certificate is in. Click Next and Finish. A message Certificate has been imported successfully is displayed. 13 RADIUS Client. In the RADIUS Client method, Advanced Authentication forwards the authentication request to a third-party RADIUS server.
This can be any RADIUS server. For example, you can use RADIUS Client as an authentication method when you have a token solution such as RSA or Vasco. You want to migrate users to Advanced Authentication with the flexibility that users can use the old tokens while the new users can use any of the other supported authentication methods. Iq option 5 min strategy can configure the following options for the RADIUS Client method.
Send the repository name Option for a repository name to be used automatically with a username. For example, company pjones. Set to ON to enable the option. NAS Identifier An attribute that contains a string identifying the NAS originating the Access-Request. It is only used in Access-Request packets. Either NAS-IP-Address or NAS-Identifier must be present in an Access-Request iq option 5 min strategy. Timeout Specify the number of seconds till when the RADIUS client waits for the RADIUS server to reply before prompting an error Connection time out.
The default value is 5 seconds. Retries count Specify the number of times, the RADIUS client tries to connect to the RADIUS server. If a connection is not established during the retry attempts, a message Failed to connect to the server is displayed. The default value is set to 3. If set to 0, the RADIUS client does not try to connect after the first unsuccessful attempt.
Specify servers per site Option to configure the third-party RADIUS servers that are specific to a site. When set to ONthe sites available in the cluster are populated and you can add more than one servers to the preferred site. When this option is set to OFFyou can add single third-party RADIUS server details that are applicable for all sites in the cluster by specifying the following details.
Server The Hostname or IP address of the third-party RADIUS server. Secret The shared secret between the RADIUS server and Advanced Authentication. Port The port to where the RADIUS authentication request is sent. The default port is 1812. 14 Security Questions. In Security Questions authentication method, an administrator can set up a series of predefined questions. A user must answer these questions to get authenticated.
Security Questions are used when users forget their passwords. Security questions are often easy to guess and can often bypass passwords. Therefore, Security Questions do not prove to be secure. You must follow few guidelines to use this method. You must use Good security questions that meet five criteria. Ensure that the answers to a good security question are. Safe Cannot be guessed or researched. Stable Does not change over time. Memorable Can be remembered.
Simple Precise, easy, and consistent. Many Has many possible answers. Some examples of good, fair, and poor security questions according to goodsecurityquestions. com are as follows. For a full list of examples, see the website. What is the first name of the person you first kissed. What is the last name of the teacher who gave you your first failing grade. What is the name of the place your wedding reception was held. In what city or town did you meet your spouse partner. What was the make and model of your first car.
What was the name of your elementary primary school. In what city or town does your nearest sibling live. What was the name of your first stuffed animal, doll, or action figure. What time of the day were you born. What was your favorite place to visit as a child. What is your pet s name. In what year was your father born. In what county where you born. What is the color of your eyes.
What is your favorite _____. Configure the following options for the Security Questions method. Minimum answer length The minimum number of characters an answer must contain. Correct answers for logon The number of answers a user must answer correctly to get access. Total questions for logon The number of questions that are presented to the user while authenticating.
For example, if the Correct answers for logon is set to 3 and the Total questions for logon is set to 5, the user needs to specify only 3 correct answers out of a set of 5 questions. Adding Questions. You can add questions based on your requirement. These questions can be translated in languages that are supported by the Advanced Authentication portals.
For example, you set a security questions as What is your pet name. While enrolling and authenticating, this question will be displayed in the language that the user selects in the portal. To add questions, perform the following. Click Add to add a question in the Question window. Specify the question in Question. You can specify the question to be translated in the required language.
This translated question is displayed in the portals and Clients based on the selected language. Click the save icon to save the question related settings. You can add more questions depending on the requirement. Click Save to save the configuration settings for the Security questions method. 15 Smartphone. Advanced Authentication provides the Smartphone method that facilitates users to authenticate through their Smartphone.
The authentication happens through the NetIQ smartphone app to perform the out-of-band authentication. The out-of-band authentication is typically a two-factor authentication that requires a secondary verification through a separate communication channel along with the ID and password. The authentication flow for the Smartphone method in Advanced Authentication is described in the following image. A user wants to authenticate on an endpoint such as a laptop or a website with the Smartphone method.
The following steps describe the authentication flow. After validating the credentials, the Advanced Authentication server sends a iq option 5 min strategy message to proxy. Depending on the platform of the Smartphone, the server selects an appropriate push service and then forwards the push message to the Smartphone. Advanced Authentication allows users to enroll the PKI method using a virtual smartcard that is imported to the browser on the user s system and used for authentication.
The push message is then delivered to the user s Smartphone to inform that an authentication request has been initiated. When the user opens the Smartphone app, the app reaches the Advanced Authentication server to validate if there is an authentication needed. The authentication is indicated by the Accept and Reject options. The user s selection is then sent to the server. Finally, the server validates the authentication and the endpoint gets authenticated.
This authentication method is recommended to use in combination with another method such as Password or LDAP Password to achieve multi-factor authentication and protect a user from getting SPAM push messages. The following are the configurations required for the Smartphone method. Advanced Authentication server must have a permitted outbound connection to proxy. Scenario for Authenticating with the Smartphone Method. Bob wants to authenticate on the myexample.
When he logs in to the website, the Smartphone authentication method sends a push message to Bob s mobile phone. When he opens the Smartphone app installed on his phone, he sees Accept and Reject options. If he selects the Accept option, the authentication request is sent over the mobile network secure back to the Authentication framework. Without specifying an OTP code, Bob has been authenticated to myexample. When your smartphone does not have a network connection, you can use a backup OTP as offline authentication.
Configuring Enrollment Link. Users can enroll the Smartphone method either by a QR code or through a link sent to their email or SMS. You as an administrator must configure the link and send it to all the users whom you want to enroll the authenticator. You can use one of the following links as per the requirement. Default category is default. Default tenant is TOP. For more information about how to set the public external URLs, see Public External URLs Load Balancers. Configuring Smartphone Method.
To configure the Smartphone method, specify the following details. The lifetime of an authentication request sent to the smartphone. The time that is valid for the user to scan the QR code for enrollment. Authentication salt TTL. The lifetime in which the out-of-band authentication needs to be accepted before authentication fails. The length of OTP token used for backup authentication. The time a TOTP is displayed on a screen before the next OTP is generated.
The default time is 30 seconds. TOTP time window. The time in seconds in which the TOTP entered is accepted. The default time is 300 seconds. Set to ON to enforce the Enable PIN setting for the Smartphone application. A user will not be able to edit the settings on the Smartphone. NOTE If the PIN is not set, then the user is prompted to set the PIN during authentication. Minimum PIN length if the PIN is required. The minimum length of the PIN. The available options are 4,5, and 6.
Set to ON to enforce the fingerprint setting for the Smartphone application. Enroll TOTP method when enrolling Smartphone. Set to ON to enable enrolling the TOTP method automatically during the Smartphone method enrollment. The TOTP method is used in the offline mode authentication. Prevent login from a rooted device. Set to ON to enable a root check for mobile devices.
The smartphone app must detect whether the device is rooted and prevent login from that device. Rooted devices can provide administrative privileges to third-party software that is not secured and mostly not allowed by device vendors. Use image on mobile devices. Select the option to use a customized image on your Smartphone app. Browse the image. This image is displayed in the About screen of your Smartphone app.
The resolution of the image must be 2732 637 pixels. NOTE The Require PINRequire biometricsand Use image on mobile devices policies are automatically applied on the smartphone if a user has an enrolled authenticator in the smartphone app and the app is open on one of the screens Authentication RequestsEnrolled Authenticatorsor Requests History. It takes 2 to 30 seconds to display the authentication request. If a user has configured a 4-digit PIN but a 6-digit PIN has been enforced by the administrator, then the user will be able to use the 4-digit PIN until the user decides to change the PIN.
If Require biometrics is set in the policies, but a user s device does not support fingerprint, the policy will not be applied for the device. If a user has authenticators enrolled for two different Advanced Authentication servers with different policies, then the policies are combined for the device and the most secure policies are applied for the app. Disable offline authentication. Select this option to disable users from authenticating using the Smartphone TOTP.
By default this option is disabled and users can login using Smartphone even when Smartphone is not connected to a network. Enabling this option will disallow users to use the One-Time Password of the Smartphone method to login to the offline mode. Google project ID. These settings are optional. If you have an approved vendor whose certificate is uploaded to proxy. com, you can specify the Vendor ID of your iOS app or specify the Google Project ID for your Android app. The push notifications will be sent only to the app whose Vendor name or Google Project ID matches with the app.
By default Advanced Authentication works with the NetIQ Auth apps. You can configure Geo-fencing with the Smartphone method. Geo-fencing allows you to authenticate with the Smartphone method with one more factor, which is the geographical location. When you enable geo-fencing, users will be able to authenticate with Smartphone from only allowed geographical locations.
You must enable the policy Geo Fencing Options to use geo-fencing. To configure geo-fencing, you need to draw a boundary of the location to be authenticated with a polygon. To configure geo-fencing, perform the following steps. Specify the name of the zone. Click the Search icon and specify the address to locate the required geographical location.
You can click the full-screen icon to view the map in the full screen. Click the polygon icon in the menu bar of the map. Click the starting point on the map and draw the boundary of the specific location to be authenticated. Click to mark the end point of the boundary after you have finished drawing the geo zone.
You can also edit the marked polygon by clicking the edit icon. NOTE To use geo-fencing, ensure that access to the location is enabled for the NetIQ Advanced Authentication app on the smartphone. NOTE You can customize the authentication request message that is displayed on the NetIQ Auth app using the Custom Messages policy. For more information about customizing the authentication request message, see Customizing Authentication Request Message For Smartphone Method.
In the SMS OTP authentication method, a one time password OTP is sent with the SMS text to the user s phone. The user receives the OTP and enters it on the device where the authentication is happening. The OTP must be used within a specific time frame. The OTPs delivered through text messages prevent phishing and malicious attacks. SMS OTP is recommended to be used with other methods, such as Password or LDAP Password. NOTE In the User s settings of a repository, ensure that a phone number without extension is used.
An SMS is not sent to the user s mobile where the phone number contains an extension. To configure the SMS OTP method, specify the following details. OTP Period The lifetime of an OTP in seconds. The default value is 120 seconds. OTP format The number of digits in the OTP. The default value is 6. Body The text in the SMS that is sent to the user. The following structure describes the text in the OTP. Name of the user. Device the user is authenticating to. Typically, the certificate is available in.
User cell phone attribute The cell phone number of a user on which the OTP is sent through SMS. You can use custom attributes such as mobilehomePhoneipPhoneand other attributes of a repository. You must define the attribute in User Cell Phone Attributes of the Repositories section. NOTE If you do not configure the attribute in the method settings, then the first attribute defined in the User Cell Phone Attributes section of Repository configuration is used when the user tries to authenticate.
For example, if you define mobile as the first attribute in User cell phone attribute and do not configure the attribute in method settings of SMS OTPthen while authenticating, the first attribute, which is the mobile attribute, is used for the SMS OTP method authentication. Allow overriding phone number Option that allows to prevent users from providing a phone number that is not registered in the LDAP repository. Set to OFF to prevent users to specify a different phone number during the enrollment.
Allow user enrollment without a phone Option to configure settings for the user to enroll the SMS OTP authenticator without a phone number in the repository. Set this option to OFF to ensure that a user does not enroll the SMS OTP authenticator without a phone. Virtual smartcard is a certificate that contains information such as digital signature, expiration date, name of user, name of CA Certificate Authorityand can be used in client SSL certificate.
Set this option to ON to allow the user to enroll the SMS OTP authenticator without a phone. 17 Swisscom Mobile ID. In the Swisscom Mobile ID authentication method, a PKI- based mobile signature secure encryption technology is stored on a user s SIM card. When the user tries to authenticate, the Swisscom Mobile ID is validated against the user s mobile phone attribute in the repository.
If the number is validated, the user gets authenticated. To configure the Swisscom Mobile ID method, specify the following details. Application Provider ID Identifier of the application provider. Application Provider password Password of the application provider. Swisscom Mobile ID service URL Interface of the Swisscom Mobile ID. Notification message prefix Message that is displayed on the user s mobile as a notification. In addition, you can upload the Swisscom client certificates as follows.
Browse Client SSL certificate. The required certificate must be in a. pem format and self-signed with a private key. Specify Private key password for the certificate. NOTE Users must activate the Mobile ID service for the Swisscom SIM card. For more information about the Swisscom Mobile ID method, see the Mobile ID Reference guide. With the FIDO U2F authentication method, users can authenticate with the touch of a finger on the U2F device.
Advanced Authentication supports the Microsoft policy Interactive logon Smart card removal behavior that allows you to specify an action on the U2F. You can configure the policy to perform a force log off or lock a session when a user removes the U2F device from a computer. This policy is supported for Windows only. When the user removes the U2F device from the computer, the Windows Client runs an action that is specified in the Interactive logon Smart card removal behavior policy.
IMPORTANT To use the FIDO U2F authentication for Access Manager in the OAuth 2. 0 event, you must configure an external web service to perform enrollment and authentication for one domain name. For more information, see Configuring a Web Server to Use the FIDO U2F Authentication. The YubiKey tokens may flash with a delay when the token is initialized in a combination mode.
For example, when authentication uses OTP and U2F methods. This may cause the users to wait for the token to flash before enrollment or authentication. Therefore, it is recommended to flash the tokens only in the U2F mode if the other modes are not needed. You can configure the following settings for this method. Configuring the Certificate Settings.
You can configure certificate settings for the FIDO U2F authentication method. By default, Advanced Authentication does not require the attestation certificate for authentication by the FIDO U2F compliant token. Ensure that you have a valid attestation certificate added for your FIDO U2F compliant token, when you configure this method. The Yubico and Feitian attestation certificates are pre-configured in the Advanced Authentication appliance. To validate the attestation certificate for the FIDO U2F authentication, perform the following steps.
Set Require attestation certificate to ON to enable validation of attestation certificate. Select the attestation certificate. To use a default certificate, click Add Default. To use a custom certificate instead of predefined device manufacturer certificate, perform the following steps. Click next to the default attestation certificate to remove the certificate. Click Add to add a custom certificate. Click Browse then select the custom certificate and click Upload.
The certificate must be in the PEM format. To restore the deleted attestation certificate, click Add Default. Configuring Facets. You can add a list of facets for the FIDO U2F tokens to work on multiple sub-domains of a single domain. Previously, the U2F RFC standards allowed authentication only on the domain name on which the enrollment was done. But with the FIDO U2F standards updatethe FIDO alliance introduces facets that allows users to authenticate even on domains on which the enrollment is not done.
WARNING Even if you are not using the facets, ensure to configure Facets to enable users to authenticate with the FIDO U2F method. If the Facets is not configured, then while authenticating with FIDO U2F, the user is prompted with a message The visited URL doesn t match the application ID or it is not in use. To add facets, perform the following steps. Expand Facets settings. Specify the facet in Facets. Click Add to add more facets. Specify the main URL in App ID.
This ID is used to identify applications. If the App ID is left blank, the first facet is used as the App ID. If the list is returned, browser allows the user to use token on the URLs specified in the Facets list. To ensure that FIDO U2F works on Chrome on the URL that is specified as the App IDyou must add this URL to Facets. NOTE Facets are supported only on Google Chrome.
The support for sub-domains is not stabilized in Chrome, therefore you might get an error message The visited URL doesn t match the application ID or it is not in use during enrollment and authentication.
Coments:02.05.2020 : 18:48 Moogujinn:
E se o seu plano iq option 5 min strategy negociação custar-lhe dinheiro. O que cria confiança na negociação. Análise do gráfico de ação do preço semanal e 8211; Super Bowl Edition 2 a 7 de fevereiro.
01.05.2020 : 14:23 Gocage:
All the famous ice hockey sock puppets and teams from 2014 2015 2016. Head hockey 2-player mode in splitscreen multiplayer.